Generator Control MDA, MNS, MDM, ICGEN2.0, ACGEN2.0, AMF COMPACT COR

Generator Control Product :

MDA (1.842.000)
The CRE TECHNOLOGY unit MDA is a low cost, microprocessor controlled unit designed to start and stop the genset automatically on request of an external Remote Start signal.
It has high power relay outputs enabling it to interface directly with diesel gensets.

MNS (1.683.000)
The MNS is a basic, microprocessor controlled unit designed to monitor 3-phase mains voltages, send remote start commands to the generating set, and manage changeover of both the generator and the mains contactors.
The genset should be controlled by a Remote Start control unit.

MDM (1.842.000)
The MDM unit from CRE TECHNOLOGY is a basic, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets.
When the engine is running, the unit monitors fault conditions and shuts down the engine automatically if an alarm occurs. The alarms are identified by LEDs.
This unit is perfect for backup mode solution.

ICGEN2.0 (8.138.000)
The ICGEN 2.0 is a complete auto transfer switch controller with remote start/stop for a single generating set operating in standby mode.
All mains parameters are checked and in case of failure, the controller will provide a remote start signal to the generator.
When the mains reappear, the ICGEN 2.0 opens the genset breaker, switches back the load on the mains and stops the generator after a programmable cooling time.

ACGEN2.0 (8.138.000)
The ACGEN 2.0 is a complete auto start controller with remote start/stop for a single generating set operating in standby mode. The ACGEN 2.0 controller is used for automatic and manual control of generators.
The test feature allows you to set various daily or weekly self tests of the generator.
The module also handles OpEx feature for the control of fuel costs.

AMF COMPACT (8.982.000)
Enhanced Auto Mains Failure genset controller with integrated programmation
Automatic and Manual Mains Failure unit with graphic display.
Engine management, transfer switch functions, engine and
electrical protections, CAN J1939 communication, I/O
extensions (up to 32 digital inputs, 32 digital outputs and 16
analog inputs). Programming capabilities with Easy Flex. Latest
communication technologies (Ethernet, CRE PC SOFTWARE,
TCP ModBus, (Master/Slave), CANopen).

AMF COMPACT CORE (8.768.000)

CABLES (2.080.000)
ACGEN2.0/ICGEN2.0 PC USB connection kit

PreOrder Indent 2-3 Bulan
harga dimohon chat penjual terlebih dahulu